Buy fast-pass.be ?
We are moving the project
fast-pass.be .
Are you interested in purchasing the domain
fast-pass.be ?
domain@kv-gmbh.de · 0541-91531010
Buy fast-pass.be ?
Zenec XFDUC8-1D
The XFDUC8-1D radio trim from Zenec enables the installation of 1-DIN device models in FIAT Ducato III, Series 8 vehicles with radio preparation from model year Q3 2021. The detachable storage compartment can be rotated and thus used flexibly in the upper or lower installation position. For installation, the original 1-DIN metal frame of the device can be used. The radio trim is compatible with all FIAT Ducato III (Series 8) models with radio preparation from Q3 2021. Note that the original radio holder is replaced by the N-XFDUC8 installation trim and the fastening is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required. Radio trim for the installation of 1-DIN device models in FIAT Ducato III, Series 8 vehicles with radio preparation from model year Q3 2021. The detachable storage compartment can be rotated and therefore used in the upper or lower installation position. For radio installation, the original 1-DIN metal frames of the device can be used. Vehicle compatibility FIAT Ducato III (Series 8) All models with radio preparation from Q3 2021 Note The original radio mount for Series 8 vehicles (with radio preparation) is replaced with the respective N-XFDUC8 installation frame. The attachment is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required.
35,24 €*
Shipping: 11,71 €
Secure redirect to the provider
Zenec XFDUC8
The radio frame XFDUC8 from Zenec enables the easy integration of the ZENEC Z-E3766/Z-E3776 and XZENT X-F270/X-F275 device models into FIAT Ducato III, Series 8 vehicles with radio preparation from production year Q3 2021. This radio frame is specifically designed for all models of the FIAT Ducato III (Series 8) and provides a precise solution for the installation of the mentioned devices. Radio facia for the installation of the ZENEC Z-E3766/Z-E3776 and XZENT X-F270/X-F275 device models in FIAT Ducato III, Series 8 vehicles with radio preparation from production year Q3 2021. Vehicle compatibility FIAT Ducato III (Series 8) All models with radio preparation from Q3 2021 Only suitable for ZENEC Z-E3766/Z-E3776 and XZENT X-F270/X-F275
29,20 €*
Shipping: 11,71 €
Secure redirect to the provider
Similar search terms for Zenec-XFDUC8-1D
Top-Angebote
Products related to Zenec-XFDUC8-1D:
-
Zenec XFDUC8-2DV2The XFDUC8-2DV2 radio trim from Zenec is specifically designed for the FIAT Ducato Series 8 and 2-DIN devices. It replaces the original radio mount and creates a less bulky impression with a more delicate design. The trim has a lower profile, which improves the accessibility of the rotary controls. The set no longer includes side mounting plates, as the V2 radio trim allows the use of the original metal frames of the devices. The installation is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required. Note The original radio mount for Series 8 vehicles (with radio preparation) is replaced with the respective N-XFDUC8 installation frame. The attachment is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required. Compared to the predecessor, the V2 frame is for FIAT Ducato Series 8 and 2-DIN devices. Optically delicate, appears less bulky "Builds little on" "With the lateral flattening, the rotary controls are more accessible." The set no longer includes side mounting plates; the V2 radio trim allows the use of the original metal frames of the devices.29,20 €*Shipping: 11,74 €Secure redirect to the provider
-
Zenec XFDUC8-SWC2The XFDUC8-SWC2 from Zenec is a steering wheel remote control, specifically designed for the Ducato Series 8 from model year Q3 2021. This resistive steering wheel interface allows for the control of FIAT Ducato III vehicles with radio preparation. A special feature of this product is that it supports radio devices from XZENT and Zenec. Please note that the phone buttons are not supported. A radio connection cable for the mentioned devices is included in the delivery. Resistive steering wheel interface for Ducato Series 8 Steering Wheel Interface - for FIAT Ducato III, Series 8 with radio preparation from production year Q3 2021 for controlling the steering wheel remote control. No support for the phone buttons. Including radio connection cable for XZENT and ZENEC devices.69,45 €*Shipping: 11,71 €Secure redirect to the provider
-
Hertz Powersport HMP 1DThe Hertz Powersport HMP 1D is a 1-Channel Amplifier with an aluminum die-cast housing and IPX64 rating. The compact format measures a maximum of 223 x 100.5 x 43.6 mm at 1.35 kg. It features a Crossover with a bridgeable crossover system, a low-pass filter at 65, 85, or 115 Hz at 12 dB/oct., a subsonic filter at 45 Hz (Off, 22 or 32 Hz, 12 dB/oct.), and a boost at 50 Hz (Off, +6 or +9 dB). It has balanced inputs with high suppression of electromagnetic interference and PRE IN. The bandwidth is 10–500 Hz, the signal-to-noise ratio is 105 dB, and the damping factor is 300 (100 Hz @ 4 Ohm). The distortion is 0.1% (100 Hz @ 4 Ohm), with Pre-In sensitivity LO: 0.2–5 V and HI: 0.8–20 V. Power supply is 11–15 VDC with 1 x 15 A Fuse, idle current is 1 A/0.04 mA, remote input is 4–15 VDC (1 mA), and it features automatic remote on/off. The HRC BM remote control for level adjustment is included. Features 1-Channel Amplifier Aluminum die-cast housing IPX64 Compact design, max. size 223 x 100.5 x 43.6 mm Weight 1.35 kg Includes HRC BM volume remote control Balanced inputs High suppression of electromagnetic interference Automatic remote on/off Inputs: PRE IN Integrated Crossover Bridgeable crossover system Full filter: Yes Low-pass: 65 / 85 / 115 Hz @ 12 dB/oct. Subsonic 45 Hz: Off / 22 / 32 Hz @ 12 dB/oct. Boost 50 Hz: Off / +6 / +9 dB Technical Specifications Channels: 1 Supply voltage: 11–15 VDC Fuse: 1 x 15 A Idle current On/Off: 1 A / 0.04 mA Current draw @ 2 Ohm, 14.4 VDC (maximum musical power): 15 A Remote input: 4–15 VDC, 1 mA Distortion (100 Hz @ 4 Ohm): 0.1% Bandwidth: 10–500 Hz Signal-to-noise ratio (A-weighted @ 1 V): 105 dB Damping factor (100 Hz @ 4 Ohm): 300 Pre-In sensitivity LO: 0.2–5 V Pre-In sensitivity HI: 0.8–20 V Minimum load impedance: 2 Ohm Output power RMS @ 14.4 VDC, THD 1%: 150 W x 1 (4 Ohm) Output power RMS @ 14.4 VDC, THD 1%: 250 W x 1 (2 Ohm) Output power RMS @ 14.4 VDC, THD 10%: 180 W x 1 (4 Ohm) Output power RMS @ 14.4 VDC, THD 10%: 300 W x 1 (2 Ohm) Total output power RMS: 300 W Max dimensions: 223 x 100.5 x 43.6 mm Dimension A: 223 mm Dimension B: 207 mm Dimension C: 100.5 mm Dimension D: 76 mm Dimension E: 43.6 mm205,76 €*Shipping: 0,00 €Secure redirect to the provider
-
Zenec RCE4605The RCE4605 from Zenec offers advanced technologies and innovative features that impress. This product stands out for its user-friendliness and high performance. With the RCE4605, you experience top-notch quality and reliability in a modern design. It combines versatile applications and technical sophistication in a compact format. ZENEC's high-resolution rearview camera, specifically designed for universal roof mounting, is equipped with a very sensitive CCD camera sensor. Due to the large viewing angle of 120° horizontal, this camera always provides a very good overview when maneuvering. Strong night vision IR LEDs that illuminate the area behind the vehicle ensure excellent visibility even in the dark. Specifications Camera system 0.25"/6.4 mm Sharp CCD Sensor Focal Length Lens F 2.5 TV System NTSC / 60 fps Viewing angle Horizontal 120° Native sensor resolution 510 x 492 pixels Resolution output signal > 420 TV lines Signal-to-noise ratio > 48 dB Light sensitivity 0 Lux (IR LEDs) Video Output 1.0 Vp-p, 75 Ohm White Balance Automatic Brightness Adjustment Automatic Automatic Synchronization Power supply DC 12V Current consumption 60mA Protection class IP67 Operating temperature -20°C~+70°C, RH 95% MAX. Dimensions (HxWxD) 23 x 19 x 30 mm Weight 200 g153,16 €*Shipping: 0,00 €Secure redirect to the provider
Zenec RVSC90
The RVSC90 from Zenec is a high-quality camera accessory that impresses with its advanced specifications. With a ⅓" / 8.5 mm Sony CCD sensor and a focal length of f2.3, it offers clear images and a high resolution of 811 (H) x 507 (V) pixels. The TV system is NTSC / 60 Hz and the viewing angle is 150° (D) x 105° (H) x 80° (V). This accessory operates automatically with features such as white balance, brightness adjustment, and synchronization. It has an excellent light sensitivity of 0.1 Lux (IR on) and a signal-to-noise ratio of more than 60 dB. The power supply is DC 12V ±1V with a current consumption of 130mA. The robust construction is protected according to IP69K and can be operated at temperatures from -20°C to +70°C. Specifications Camera system ⅓" / 8.5 mm Sony CCD Sensor Focal length lens f2.3 TV System NTSC / 60 Hz Viewing angle 150°(D) x 105°(H) x 80°(V) Native sensor resolution 811 (H) x 507 (V) pixels Resolution output signal > 600 TV lines Signal-to-noise ratio > 60 dB Light sensitivity 0.1 Lux (IR on) Video Output 1.0 Vp-p, 75 Ohm White Balance Automatic Brightness Adjustment Automatic Automatic Synchronization Power supply DC 12V ±1V Current consumption 130mA (DC12V) / ≤ 1.5W Protection class IP69K Operating temperature -20°C~+70°C, RH 95% MAX. Dimensions – Short bracket (HxWxD) 74 x 85 x 65 mm Dimensions – Ironing board long (HxWxD) 101 x 85 x 65 mm Weight 333 g
230,52 €*
Shipping: 0,00 €
Secure redirect to the provider
Zenec RVC85WA
The RVC85WA from Zenec is a versatile camera accessory that features a ¼" / 6.4 mm Aptina ASX340 CMOS sensor. It offers a focal length of f1.05 and operates in the NTSC TV system at 60 Hz. With an impressive viewing angle of 210° (D) x 190° (H) x 140° (V) and a native sensor resolution of 680 (H) x 512 (V) pixels, it delivers clear and detailed images. The IP69K protection class ensures reliable protection even in the harshest conditions. Thanks to automatically controlled functions such as white balance, exposure compensation, and brightness adjustment, as well as a light sensitivity of 0.5 Lux, the RVC85WA is optimally suited for various applications. Specifications Camera system ¼" / 6.4 mm Aptina ASX340 CMOS Sensor Focal length lens f1.05 TV System NTSC / 60 Hz Viewing angle 210° (D) x 190° (H) x 140° (V) Native sensor resolution 680 (H) x 512 (V) pixels Resolution output signal > 420 TV lines Frame rate 60 fields/sec. Signal-to-noise ratio > 48 dB Light sensitivity 0.5 Lux/F1.2/50IRE Video Output 1.0 Vp-p, 75 Ohm CVBS White Balance Automatic Exposure Compensation Automatic Gamma Correction 0.45 Brightness Adjustment Automatic Automatic Synchronization Power supply DC 5 – 16 V Current consumption 60 mA (DC12 V) / ≤ 720 mW Protection class IP69K Operating temperature -30°C ~ +75°C Dimensions front housing 22 x 25 x 27 mm Dimensions rear housing 27 x 23 x 35 mm Weight 20 g
160,06 €*
Shipping: 0,00 €
Secure redirect to the provider
Top-Angebote
Products related to Zenec-XFDUC8-1D:
-
Zenec XFDUC8-1DThe XFDUC8-1D radio trim from Zenec enables the installation of 1-DIN device models in FIAT Ducato III, Series 8 vehicles with radio preparation from model year Q3 2021. The detachable storage compartment can be rotated and thus used flexibly in the upper or lower installation position. For installation, the original 1-DIN metal frame of the device can be used. The radio trim is compatible with all FIAT Ducato III (Series 8) models with radio preparation from Q3 2021. Note that the original radio holder is replaced by the N-XFDUC8 installation trim and the fastening is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required. Radio trim for the installation of 1-DIN device models in FIAT Ducato III, Series 8 vehicles with radio preparation from model year Q3 2021. The detachable storage compartment can be rotated and therefore used in the upper or lower installation position. For radio installation, the original 1-DIN metal frames of the device can be used. Vehicle compatibility FIAT Ducato III (Series 8) All models with radio preparation from Q3 2021 Note The original radio mount for Series 8 vehicles (with radio preparation) is replaced with the respective N-XFDUC8 installation frame. The attachment is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required.35,24 €*Shipping: 11,71 €Secure redirect to the provider
-
Zenec XFDUC8The radio frame XFDUC8 from Zenec enables the easy integration of the ZENEC Z-E3766/Z-E3776 and XZENT X-F270/X-F275 device models into FIAT Ducato III, Series 8 vehicles with radio preparation from production year Q3 2021. This radio frame is specifically designed for all models of the FIAT Ducato III (Series 8) and provides a precise solution for the installation of the mentioned devices. Radio facia for the installation of the ZENEC Z-E3766/Z-E3776 and XZENT X-F270/X-F275 device models in FIAT Ducato III, Series 8 vehicles with radio preparation from production year Q3 2021. Vehicle compatibility FIAT Ducato III (Series 8) All models with radio preparation from Q3 2021 Only suitable for ZENEC Z-E3766/Z-E3776 and XZENT X-F270/X-F27529,20 €*Shipping: 11,71 €Secure redirect to the provider
-
Zenec XFDUC8-2DV2The XFDUC8-2DV2 radio trim from Zenec is specifically designed for the FIAT Ducato Series 8 and 2-DIN devices. It replaces the original radio mount and creates a less bulky impression with a more delicate design. The trim has a lower profile, which improves the accessibility of the rotary controls. The set no longer includes side mounting plates, as the V2 radio trim allows the use of the original metal frames of the devices. The installation is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required. Note The original radio mount for Series 8 vehicles (with radio preparation) is replaced with the respective N-XFDUC8 installation frame. The attachment is done with the four original screws. Depending on the vehicle manufacturer, additional stalk/CAN interfaces, antenna adapters, FM/DAB switches, or ISO cable sets with radio switches may be required. Compared to the predecessor, the V2 frame is for FIAT Ducato Series 8 and 2-DIN devices. Optically delicate, appears less bulky "Builds little on" "With the lateral flattening, the rotary controls are more accessible." The set no longer includes side mounting plates; the V2 radio trim allows the use of the original metal frames of the devices.29,20 €*Shipping: 11,74 €Secure redirect to the provider
-
Zenec XFDUC8-SWC2The XFDUC8-SWC2 from Zenec is a steering wheel remote control, specifically designed for the Ducato Series 8 from model year Q3 2021. This resistive steering wheel interface allows for the control of FIAT Ducato III vehicles with radio preparation. A special feature of this product is that it supports radio devices from XZENT and Zenec. Please note that the phone buttons are not supported. A radio connection cable for the mentioned devices is included in the delivery. Resistive steering wheel interface for Ducato Series 8 Steering Wheel Interface - for FIAT Ducato III, Series 8 with radio preparation from production year Q3 2021 for controlling the steering wheel remote control. No support for the phone buttons. Including radio connection cable for XZENT and ZENEC devices.69,45 €*Shipping: 11,71 €Secure redirect to the provider
Similar search terms for Zenec-XFDUC8-1D
-
Hertz Powersport HMP 1DThe Hertz Powersport HMP 1D is a 1-Channel Amplifier with an aluminum die-cast housing and IPX64 rating. The compact format measures a maximum of 223 x 100.5 x 43.6 mm at 1.35 kg. It features a Crossover with a bridgeable crossover system, a low-pass filter at 65, 85, or 115 Hz at 12 dB/oct., a subsonic filter at 45 Hz (Off, 22 or 32 Hz, 12 dB/oct.), and a boost at 50 Hz (Off, +6 or +9 dB). It has balanced inputs with high suppression of electromagnetic interference and PRE IN. The bandwidth is 10–500 Hz, the signal-to-noise ratio is 105 dB, and the damping factor is 300 (100 Hz @ 4 Ohm). The distortion is 0.1% (100 Hz @ 4 Ohm), with Pre-In sensitivity LO: 0.2–5 V and HI: 0.8–20 V. Power supply is 11–15 VDC with 1 x 15 A Fuse, idle current is 1 A/0.04 mA, remote input is 4–15 VDC (1 mA), and it features automatic remote on/off. The HRC BM remote control for level adjustment is included. Features 1-Channel Amplifier Aluminum die-cast housing IPX64 Compact design, max. size 223 x 100.5 x 43.6 mm Weight 1.35 kg Includes HRC BM volume remote control Balanced inputs High suppression of electromagnetic interference Automatic remote on/off Inputs: PRE IN Integrated Crossover Bridgeable crossover system Full filter: Yes Low-pass: 65 / 85 / 115 Hz @ 12 dB/oct. Subsonic 45 Hz: Off / 22 / 32 Hz @ 12 dB/oct. Boost 50 Hz: Off / +6 / +9 dB Technical Specifications Channels: 1 Supply voltage: 11–15 VDC Fuse: 1 x 15 A Idle current On/Off: 1 A / 0.04 mA Current draw @ 2 Ohm, 14.4 VDC (maximum musical power): 15 A Remote input: 4–15 VDC, 1 mA Distortion (100 Hz @ 4 Ohm): 0.1% Bandwidth: 10–500 Hz Signal-to-noise ratio (A-weighted @ 1 V): 105 dB Damping factor (100 Hz @ 4 Ohm): 300 Pre-In sensitivity LO: 0.2–5 V Pre-In sensitivity HI: 0.8–20 V Minimum load impedance: 2 Ohm Output power RMS @ 14.4 VDC, THD 1%: 150 W x 1 (4 Ohm) Output power RMS @ 14.4 VDC, THD 1%: 250 W x 1 (2 Ohm) Output power RMS @ 14.4 VDC, THD 10%: 180 W x 1 (4 Ohm) Output power RMS @ 14.4 VDC, THD 10%: 300 W x 1 (2 Ohm) Total output power RMS: 300 W Max dimensions: 223 x 100.5 x 43.6 mm Dimension A: 223 mm Dimension B: 207 mm Dimension C: 100.5 mm Dimension D: 76 mm Dimension E: 43.6 mm205,76 €*Shipping: 0,00 €Secure redirect to the provider
-
Zenec RCE4605The RCE4605 from Zenec offers advanced technologies and innovative features that impress. This product stands out for its user-friendliness and high performance. With the RCE4605, you experience top-notch quality and reliability in a modern design. It combines versatile applications and technical sophistication in a compact format. ZENEC's high-resolution rearview camera, specifically designed for universal roof mounting, is equipped with a very sensitive CCD camera sensor. Due to the large viewing angle of 120° horizontal, this camera always provides a very good overview when maneuvering. Strong night vision IR LEDs that illuminate the area behind the vehicle ensure excellent visibility even in the dark. Specifications Camera system 0.25"/6.4 mm Sharp CCD Sensor Focal Length Lens F 2.5 TV System NTSC / 60 fps Viewing angle Horizontal 120° Native sensor resolution 510 x 492 pixels Resolution output signal > 420 TV lines Signal-to-noise ratio > 48 dB Light sensitivity 0 Lux (IR LEDs) Video Output 1.0 Vp-p, 75 Ohm White Balance Automatic Brightness Adjustment Automatic Automatic Synchronization Power supply DC 12V Current consumption 60mA Protection class IP67 Operating temperature -20°C~+70°C, RH 95% MAX. Dimensions (HxWxD) 23 x 19 x 30 mm Weight 200 g153,16 €*Shipping: 0,00 €Secure redirect to the provider
-
Zenec RVSC90The RVSC90 from Zenec is a high-quality camera accessory that impresses with its advanced specifications. With a ⅓" / 8.5 mm Sony CCD sensor and a focal length of f2.3, it offers clear images and a high resolution of 811 (H) x 507 (V) pixels. The TV system is NTSC / 60 Hz and the viewing angle is 150° (D) x 105° (H) x 80° (V). This accessory operates automatically with features such as white balance, brightness adjustment, and synchronization. It has an excellent light sensitivity of 0.1 Lux (IR on) and a signal-to-noise ratio of more than 60 dB. The power supply is DC 12V ±1V with a current consumption of 130mA. The robust construction is protected according to IP69K and can be operated at temperatures from -20°C to +70°C. Specifications Camera system ⅓" / 8.5 mm Sony CCD Sensor Focal length lens f2.3 TV System NTSC / 60 Hz Viewing angle 150°(D) x 105°(H) x 80°(V) Native sensor resolution 811 (H) x 507 (V) pixels Resolution output signal > 600 TV lines Signal-to-noise ratio > 60 dB Light sensitivity 0.1 Lux (IR on) Video Output 1.0 Vp-p, 75 Ohm White Balance Automatic Brightness Adjustment Automatic Automatic Synchronization Power supply DC 12V ±1V Current consumption 130mA (DC12V) / ≤ 1.5W Protection class IP69K Operating temperature -20°C~+70°C, RH 95% MAX. Dimensions – Short bracket (HxWxD) 74 x 85 x 65 mm Dimensions – Ironing board long (HxWxD) 101 x 85 x 65 mm Weight 333 g230,52 €*Shipping: 0,00 €Secure redirect to the provider
-
Zenec RVC85WAThe RVC85WA from Zenec is a versatile camera accessory that features a ¼" / 6.4 mm Aptina ASX340 CMOS sensor. It offers a focal length of f1.05 and operates in the NTSC TV system at 60 Hz. With an impressive viewing angle of 210° (D) x 190° (H) x 140° (V) and a native sensor resolution of 680 (H) x 512 (V) pixels, it delivers clear and detailed images. The IP69K protection class ensures reliable protection even in the harshest conditions. Thanks to automatically controlled functions such as white balance, exposure compensation, and brightness adjustment, as well as a light sensitivity of 0.5 Lux, the RVC85WA is optimally suited for various applications. Specifications Camera system ¼" / 6.4 mm Aptina ASX340 CMOS Sensor Focal length lens f1.05 TV System NTSC / 60 Hz Viewing angle 210° (D) x 190° (H) x 140° (V) Native sensor resolution 680 (H) x 512 (V) pixels Resolution output signal > 420 TV lines Frame rate 60 fields/sec. Signal-to-noise ratio > 48 dB Light sensitivity 0.5 Lux/F1.2/50IRE Video Output 1.0 Vp-p, 75 Ohm CVBS White Balance Automatic Exposure Compensation Automatic Gamma Correction 0.45 Brightness Adjustment Automatic Automatic Synchronization Power supply DC 5 – 16 V Current consumption 60 mA (DC12 V) / ≤ 720 mW Protection class IP69K Operating temperature -30°C ~ +75°C Dimensions front housing 22 x 25 x 27 mm Dimensions rear housing 27 x 23 x 35 mm Weight 20 g160,06 €*Shipping: 0,00 €Secure redirect to the provider
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.