Buy fast-pass.be ?
We are moving the project
fast-pass.be .
Are you interested in purchasing the domain
fast-pass.be ?
domain@kv-gmbh.de · 0541-91531010
Buy fast-pass.be ?
Can you show that p divides the Catalan number Cp 1?
Yes, we can show that p divides the Catalan number Cp 1 using the formula for the Catalan numbers. The formula for the nth Catalan number is given by Cp = (2n)! / ((n+1)! * n!). Since p is a prime number, it must divide the numerator (2n)! and not divide the denominator (n+1)! * n!. Therefore, p divides Cp for any positive integer n. **
Should I buy the Acer Swift 1?
The decision to buy the Acer Swift 1 depends on your specific needs and budget. The Acer Swift 1 is a budget-friendly laptop with a sleek design and decent performance for everyday tasks such as web browsing, word processing, and multimedia consumption. However, if you require more power for demanding tasks like video editing or gaming, you may want to consider a higher-end model. Overall, if you are looking for a basic, affordable laptop for everyday use, the Acer Swift 1 could be a good option. **
Similar search terms for Hertz-Cento-CP-1
Top-Angebote
Products related to Hertz-Cento-CP-1:
-
Hertz Cento CP 4.800The Cento CP 4.800 from Hertz is a 4-Channel Amplifier with Class D technology and an efficiency of 85 percent. The device features a Hi-Res Audio certification and covers a frequency range from 10 Hz to 41 kHz. The total power is 760 W RMS with a distortion factor of 1 percent THD. The housing is made of robust aluminum die-cast and is equipped with ready-to-plug connections. The operating voltage ranges from 9 to 18 VDC with a variable power supply nominal voltage of 11 to 15 VDC. Additional features include advanced crossover filters and bass boost options. Features 4-Channel Amplifier Class D Amplifier Aluminum die-cast housing Hi-Res Audio certification Efficiency: 85 percent Ready-to-plug connections Adjustable crossovers ART - Automatic remote control on/off Harmonic distortion at 100 Hz: 0.02 percent Technical Specifications Output power at 4 Ohms: 4 x 110 W RMS Output power at 2 Ohms: 4 x 190 W RMS Bridged output power at 4 Ohms: 2 x 380 W RMS Total power: 760 W RMS Nominal power supply voltage: 11 - 15 VDC Operating voltage: 9 - 18 VDC Idle current: 1.15 A Standby power consumption: 4.2 uA Signal-to-noise ratio: 101 dBA Damping factor at 1 kHz: 100 Bandwidth at -3 dB: 10 Hz - 47 kHz Minimum load impedance at 4 channels: 2 Ohms331,19 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Cento CP 5.1KThe Cento CP 5.1K from Hertz is a 5-Channel Amplifier based on Class D technology. The device features a compact aluminum die-cast housing and is Hi-Res Audio certified. The total power is 1030 Watts RMS, with various configurations available for 2 Ohm and 4 Ohm load impedances. A high efficiency of 83 percent to over 85 percent, as well as a signal-to-noise ratio of up to 116 dBA, characterize the technical specifications. The amplifier supports an operating voltage of 9 to 18 VDC and is fully bridgeable. Features include adjustable crossovers, a comprehensive control set, and Ready to Plug connectivity. An automatic remote control ART for turning on and off via SPK-IN is integrated. Features 5-Channel Amplifier Class D Amplifier Aluminum die-cast housing Hi-Res Audio certified Adjustable crossovers Ready to Plug connectivity ART - Automatic remote control Fully bridgeable Technical Specifications Total power: 1030 Watts RMS Output power 5 channels at 4 Ohm: 4 x 80 Watts + 1 x 330 Watts RMS Output power 5 channels at 2 Ohm: 4 x 130 Watts + 1 x 510 Watts RMS Output power 3 channels at 2 Ohm / 4 Ohm: 2 x 260 Watts + 1 x 510 Watts RMS Output power 2 channels at 4 Ohm: 2 x 260 Watts + 1 x 320 Watts RMS Operating voltage: 9 - 18 VDC Nominal voltage fuse: 11 - 15 VDC (2 x 30 A) Efficiency: 83 percent Signal-to-noise ratio: 101 dBA (F/R) / 116 dBA (SUB) Bandwidth: 10 Hz - 47 kHz (F/R) / 10 Hz - 500 Hz (SUB) THD distortion: 0.01 percent (F/R) / 0.06 percent (SUB) Damping factor: 160 (F/R) / 180 (SUB) No-load current: 1.90 A Standby power consumption: 4 uA Maximum consumption: 48 A Minimum load impedance: 2 Ohm414,33 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Cento CK 165The Cento CK 165 is a 6.5-inch (16.5 cm) Speaker Set from Hertz featuring the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the C 165 mid-bass driver with a 165 mm SPP-M semi-pressed paper diaphragm with mica. The Tweeter uses a neodymium magnet with high magnetic flux and a FEM-optimized front plate. The mid-bass driver has a 25 mm voice coil aluminum former, a flux ferrite magnet, and a compact three-spoke basket with a rubber magnet cover. The passive 2-way Crossover CCX 2 separates at 2.5 kHz with 12 dB/oct. and offers a three-position switch for the Tweeter level at 0 and +3 dB. The nominal power handling is 95 W RMS, the peak power handling is 285 W, the impedance is 4 Ohms, the sensitivity is 93 dB SPL, and the frequency response is 55 Hz to 22.5 kHz. Speaker Grilles are included. Features 6.5-inch (16.5 cm) Speaker Set Passive 2-way system with CCX 2 Crossover Tweeter C 26: 26 mm Tetolon dome, 20 mm voice coil Neodymium magnet on the Tweeter with high magnetic flux FEM-optimized Tweeter front plate Mid-bass driver C 165: 165 mm SPP-M semi-pressed paper diaphragm with mica Flux ferrite magnet on the mid-bass driver 25 mm voice coil with aluminum former on the mid-bass driver Compact three-spoke basket, acoustically combined with rubber magnet cover ABS Speaker Grille with metallic finish and protective metal grille CCX 2: Three-position switch for Tweeter level 0, +3 dB CCX 2: Capacitors with low loss factor and low-resistance inductors made of pure copper CCX 2: Compact design with metallic finish and ventilation slots Accessories for integration into OEM placements Speaker Grille included Technical Specifications Nominal power handling RMS 95 W Peak power handling 285 W Impedance 4 Ohms Sensitivity 93 dB SPL Frequency response 55 Hz – 22.5 kHz Crossover frequency 2.5 kHz @ 12 dB/oct. Crossover type Passive, 2-way Size 165 mm Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.2 mH Vas 13.24 l Mms 13.9 g Cms 0.51 mm/N BL 4.9 T·m Qts 0.59 Qes 0.69 Qms 3.9 Weight of mid-bass driver 0.96 Weight of Tweeter 0.03 kg Weight of Crossover 0.185 kg146,57 €*Shipping: 12,42 €Secure redirect to the provider
-
Hertz Cento C 26The Hertz Cento C 26 is a Dome Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil. A Neodymium magnet and an optimized faceplate geometry are integrated. Designed with a linear characteristic. The impedance is 4 Ohm and the peak power handling is 120 W. The frequency response ranges from 1.8 kHz to 22.5 kHz, and the sensitivity is 92 dB. The free air resonance is at 1500 Hz, and the DC resistance is 3.7 Ohm. The weight is 0.04 kg. Accessories for installation in original mounting locations are included. Features Dome Tweeter 26 mm Tetolon diaphragm 20 mm voice coil Impedance 4 Ohm Neodymium magnet Optimized faceplate geometry Linear characteristic Peak power 120 W Frequency response 1.8 kHz – 22.5 kHz Sensitivity 92 dB Accessories for installation in original mounting locations Weight 0.04 kg Technical specifications Size 26 mm Voice coil Ø 20 mm Re 3.7 Ohm Fs 1500 Hz Le 0.02 mH Mms 0.17 g Cms 0.07 mm/N BL 1.3 T*m Qts 1.6 Qes 3.5 Qms 2.9 Magnet Neodymium Magnet size (W x D x H) 19 x 0 x 3 mm A 44 mm B 38.5 mm C 20 mm D 9.1 mm Note: High-pass filtered @ 2.5 kHz – 12 dB/Oct.50,74 €*Shipping: 11,95 €Secure redirect to the provider
-
Is the Acer Swift 1 good enough?
The Acer Swift 1 is a budget-friendly laptop that offers decent performance for everyday tasks such as web browsing, word processing, and streaming media. It has a lightweight and slim design, making it convenient for on-the-go use. However, it may not be suitable for more demanding tasks such as gaming or video editing due to its lower-end hardware. Overall, if you are looking for a basic, affordable laptop for light use, the Acer Swift 1 could be a good option. **
-
Is 1 Gbit/s fast?
Yes, 1 Gbit/s (gigabit per second) is considered very fast. It is equivalent to 1000 megabits per second, which means it can transfer data at a rate of 1 billion bits per second. This speed is commonly associated with high-speed internet connections and is more than sufficient for most online activities, including streaming high-definition video, online gaming, and large file downloads. **
-
How fast can Formula 1 cars go?
Formula 1 cars can reach speeds of up to 230 mph (370 km/h) on the fastest tracks. The top speed of a Formula 1 car is limited by regulations, but they are still incredibly fast vehicles. The acceleration of these cars is also impressive, with the ability to go from 0 to 60 mph in just 2 seconds. The high speeds and quick acceleration of Formula 1 cars make them some of the fastest racing vehicles in the world. **
-
How fast do Formula 1 drivers drive?
Formula 1 drivers can reach speeds of over 200 miles per hour (320 km/h) on certain tracks. The average speed during a race can vary depending on the track layout, but it is generally around 130-150 miles per hour (210-240 km/h). The top speed achieved by Formula 1 cars is influenced by factors such as track design, aerodynamics, and engine power. These high speeds require exceptional skill, precision, and focus from the drivers. **
How fast is the 2016 Formula 1 car?
The 2016 Formula 1 car is incredibly fast, with top speeds reaching over 230 mph (370 km/h) on certain tracks. These cars are designed to be the fastest racing cars in the world, with powerful engines and advanced aerodynamics that allow them to reach such high speeds. The acceleration of these cars is also impressive, going from 0 to 60 mph in just 2 seconds. Overall, the 2016 Formula 1 car is a marvel of engineering and speed. **
Why doesn't Xbox Game Pass Ultimate 1 work?
Xbox Game Pass Ultimate 1 may not work due to a variety of reasons, including technical issues with the Xbox Live service, account payment problems, or issues with the game itself. It's possible that there may be a temporary outage or maintenance affecting the service. Additionally, there could be a problem with the user's account or subscription status. It's recommended to check for any service alerts or contact Xbox support for assistance in resolving the issue. **
Top-Angebote
Products related to Hertz-Cento-CP-1:
-
Hertz Cento CP 1.700The Hertz Cento CP 1.700 is a 1-Channel Amplifier of Class D with an efficiency of 89 percent. The output power is 400 Watts RMS at 4 Ohms and 700 Watts RMS at 2 Ohms. The device operates within a supply voltage of 9 to 18 VDC and has a nominal supply voltage of 11 to 15 VDC, protected by two 25 A Fuses. Adjustable crossovers as well as a bass boost of 0 to 9 dB at 50 Hz are integrated. The amplifier has a signal-to-noise ratio of 113 dBA and a distortion level of 0.01 percent at 100 Hz. The minimum load impedance is 2 Ohms. Features 1-Channel Amplifier Amplifier Class D Output power at 4 Ohms: 400 Watts RMS Output power at 2 Ohms: 700 Watts RMS Total power: 700 Watts RMS Efficiency: 89 percent Adjustable crossovers Bass boost at 50 Hz: 0 - 9 dB Inputs: Pre-In / Speaker-In ART - Automatic remote control on/off from SPK-IN Technical Specifications Operating voltage: 9 - 18 VDC Nominal supply voltage: 11 - 15 VDC Fuse: 2 x 25 A Idle current: 1.10 A Standby power consumption: 4.5 uA Maximum power consumption at minimum load: 33 A Remote control input: 4 - 17 VDC (1 mA) THD at 100 Hz: 0.01 percent Damping factor at 1 kHz: 350 Bandwidth at -3 dB: 10 Hz - 500 Hz Signal-to-noise ratio: 113 dBA Pre-Out high pass: 50 - 250 Hz (12 dB/Oct.) Pre-In sensitivity: 0.32 - 8 VRMS Speaker input sensitivity: 1.6 - 40 VRMS Sub-channel low pass: OFF / 50 - 250 Hz (24 dB/Oct.) Subsonic high pass: OFF / 25 Hz (24 dB/Oct.) Sub-remote for volume control: -20 - 6 dB314,62 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Cento CP 1.2KThe Cento CP 1.2K by Hertz is a 1-Channel Amplifier of Class D with an efficiency of 89 percent. It features a compact aluminum die-cast housing and is designed for an operating voltage of 9 to 18 VDC. The power output is 650 watts RMS at 4 ohms and 1200 watts RMS at 2 ohms. Technical features include a universal speaker simulator, a damping factor of 140 at 1 kHz, and a signal-to-noise ratio of 102 dBA. Adjustable crossovers, a low-pass crossover filter, a subsonic filter, and bass boost at 50 Hz are integrated. The frequency range extends from 10 Hz to 500 Hz. Features 1-Channel Amplifier Amp Class: D Power: 650 watts RMS at 4 ohms Power: 1200 watts RMS at 2 ohms Efficiency: 89 percent Aluminum die-cast housing Adjustable crossovers Bass boost (50 Hz): 0 - 9 dB Universal speaker simulator Sub-remote for volume Technical Specifications Operating voltage: 9 - 18 VDC Nominal supply voltage: 11 - 15 VDC (2 x 35 A) Bandwidth at -3 dB: 10 Hz - 500 Hz Damping factor at 1 kHz, 1 W: 140 Signal-to-noise ratio: 102 dBA Distortion (THD) at 100 Hz: 0.03 percent No-load current: 0.85 A Standby power consumption: 4.5 µA Minimum load impedance: 2 ohms Pre-in sensitivity: 0.32 - 8 VRMS Speaker input sensitivity: 1.6 - 40 Veff Sub-channel low-pass: OFF / 50 - 250 Hz at 24 dB/Oct. Subsonic high-pass: OFF / 25 Hz at 24 dB/Oct. Preamp output: High-pass 50 - 250 Hz at 12 dB/Oct. ART – Automatic on/off via SPK-IN: 1.5 VDC414,33 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Cento CP 4.800The Cento CP 4.800 from Hertz is a 4-Channel Amplifier with Class D technology and an efficiency of 85 percent. The device features a Hi-Res Audio certification and covers a frequency range from 10 Hz to 41 kHz. The total power is 760 W RMS with a distortion factor of 1 percent THD. The housing is made of robust aluminum die-cast and is equipped with ready-to-plug connections. The operating voltage ranges from 9 to 18 VDC with a variable power supply nominal voltage of 11 to 15 VDC. Additional features include advanced crossover filters and bass boost options. Features 4-Channel Amplifier Class D Amplifier Aluminum die-cast housing Hi-Res Audio certification Efficiency: 85 percent Ready-to-plug connections Adjustable crossovers ART - Automatic remote control on/off Harmonic distortion at 100 Hz: 0.02 percent Technical Specifications Output power at 4 Ohms: 4 x 110 W RMS Output power at 2 Ohms: 4 x 190 W RMS Bridged output power at 4 Ohms: 2 x 380 W RMS Total power: 760 W RMS Nominal power supply voltage: 11 - 15 VDC Operating voltage: 9 - 18 VDC Idle current: 1.15 A Standby power consumption: 4.2 uA Signal-to-noise ratio: 101 dBA Damping factor at 1 kHz: 100 Bandwidth at -3 dB: 10 Hz - 47 kHz Minimum load impedance at 4 channels: 2 Ohms331,19 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Cento CP 5.1KThe Cento CP 5.1K from Hertz is a 5-Channel Amplifier based on Class D technology. The device features a compact aluminum die-cast housing and is Hi-Res Audio certified. The total power is 1030 Watts RMS, with various configurations available for 2 Ohm and 4 Ohm load impedances. A high efficiency of 83 percent to over 85 percent, as well as a signal-to-noise ratio of up to 116 dBA, characterize the technical specifications. The amplifier supports an operating voltage of 9 to 18 VDC and is fully bridgeable. Features include adjustable crossovers, a comprehensive control set, and Ready to Plug connectivity. An automatic remote control ART for turning on and off via SPK-IN is integrated. Features 5-Channel Amplifier Class D Amplifier Aluminum die-cast housing Hi-Res Audio certified Adjustable crossovers Ready to Plug connectivity ART - Automatic remote control Fully bridgeable Technical Specifications Total power: 1030 Watts RMS Output power 5 channels at 4 Ohm: 4 x 80 Watts + 1 x 330 Watts RMS Output power 5 channels at 2 Ohm: 4 x 130 Watts + 1 x 510 Watts RMS Output power 3 channels at 2 Ohm / 4 Ohm: 2 x 260 Watts + 1 x 510 Watts RMS Output power 2 channels at 4 Ohm: 2 x 260 Watts + 1 x 320 Watts RMS Operating voltage: 9 - 18 VDC Nominal voltage fuse: 11 - 15 VDC (2 x 30 A) Efficiency: 83 percent Signal-to-noise ratio: 101 dBA (F/R) / 116 dBA (SUB) Bandwidth: 10 Hz - 47 kHz (F/R) / 10 Hz - 500 Hz (SUB) THD distortion: 0.01 percent (F/R) / 0.06 percent (SUB) Damping factor: 160 (F/R) / 180 (SUB) No-load current: 1.90 A Standby power consumption: 4 uA Maximum consumption: 48 A Minimum load impedance: 2 Ohm414,33 €*Shipping: 0,00 €Secure redirect to the provider
-
Can you show that p divides the Catalan number Cp 1?
Yes, we can show that p divides the Catalan number Cp 1 using the formula for the Catalan numbers. The formula for the nth Catalan number is given by Cp = (2n)! / ((n+1)! * n!). Since p is a prime number, it must divide the numerator (2n)! and not divide the denominator (n+1)! * n!. Therefore, p divides Cp for any positive integer n. **
-
Should I buy the Acer Swift 1?
The decision to buy the Acer Swift 1 depends on your specific needs and budget. The Acer Swift 1 is a budget-friendly laptop with a sleek design and decent performance for everyday tasks such as web browsing, word processing, and multimedia consumption. However, if you require more power for demanding tasks like video editing or gaming, you may want to consider a higher-end model. Overall, if you are looking for a basic, affordable laptop for everyday use, the Acer Swift 1 could be a good option. **
-
Is the Acer Swift 1 good enough?
The Acer Swift 1 is a budget-friendly laptop that offers decent performance for everyday tasks such as web browsing, word processing, and streaming media. It has a lightweight and slim design, making it convenient for on-the-go use. However, it may not be suitable for more demanding tasks such as gaming or video editing due to its lower-end hardware. Overall, if you are looking for a basic, affordable laptop for light use, the Acer Swift 1 could be a good option. **
-
Is 1 Gbit/s fast?
Yes, 1 Gbit/s (gigabit per second) is considered very fast. It is equivalent to 1000 megabits per second, which means it can transfer data at a rate of 1 billion bits per second. This speed is commonly associated with high-speed internet connections and is more than sufficient for most online activities, including streaming high-definition video, online gaming, and large file downloads. **
Similar search terms for Hertz-Cento-CP-1
-
Hertz Cento CK 165The Cento CK 165 is a 6.5-inch (16.5 cm) Speaker Set from Hertz featuring the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the C 165 mid-bass driver with a 165 mm SPP-M semi-pressed paper diaphragm with mica. The Tweeter uses a neodymium magnet with high magnetic flux and a FEM-optimized front plate. The mid-bass driver has a 25 mm voice coil aluminum former, a flux ferrite magnet, and a compact three-spoke basket with a rubber magnet cover. The passive 2-way Crossover CCX 2 separates at 2.5 kHz with 12 dB/oct. and offers a three-position switch for the Tweeter level at 0 and +3 dB. The nominal power handling is 95 W RMS, the peak power handling is 285 W, the impedance is 4 Ohms, the sensitivity is 93 dB SPL, and the frequency response is 55 Hz to 22.5 kHz. Speaker Grilles are included. Features 6.5-inch (16.5 cm) Speaker Set Passive 2-way system with CCX 2 Crossover Tweeter C 26: 26 mm Tetolon dome, 20 mm voice coil Neodymium magnet on the Tweeter with high magnetic flux FEM-optimized Tweeter front plate Mid-bass driver C 165: 165 mm SPP-M semi-pressed paper diaphragm with mica Flux ferrite magnet on the mid-bass driver 25 mm voice coil with aluminum former on the mid-bass driver Compact three-spoke basket, acoustically combined with rubber magnet cover ABS Speaker Grille with metallic finish and protective metal grille CCX 2: Three-position switch for Tweeter level 0, +3 dB CCX 2: Capacitors with low loss factor and low-resistance inductors made of pure copper CCX 2: Compact design with metallic finish and ventilation slots Accessories for integration into OEM placements Speaker Grille included Technical Specifications Nominal power handling RMS 95 W Peak power handling 285 W Impedance 4 Ohms Sensitivity 93 dB SPL Frequency response 55 Hz – 22.5 kHz Crossover frequency 2.5 kHz @ 12 dB/oct. Crossover type Passive, 2-way Size 165 mm Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.2 mH Vas 13.24 l Mms 13.9 g Cms 0.51 mm/N BL 4.9 T·m Qts 0.59 Qes 0.69 Qms 3.9 Weight of mid-bass driver 0.96 Weight of Tweeter 0.03 kg Weight of Crossover 0.185 kg146,57 €*Shipping: 12,42 €Secure redirect to the provider
-
Hertz Cento C 26The Hertz Cento C 26 is a Dome Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil. A Neodymium magnet and an optimized faceplate geometry are integrated. Designed with a linear characteristic. The impedance is 4 Ohm and the peak power handling is 120 W. The frequency response ranges from 1.8 kHz to 22.5 kHz, and the sensitivity is 92 dB. The free air resonance is at 1500 Hz, and the DC resistance is 3.7 Ohm. The weight is 0.04 kg. Accessories for installation in original mounting locations are included. Features Dome Tweeter 26 mm Tetolon diaphragm 20 mm voice coil Impedance 4 Ohm Neodymium magnet Optimized faceplate geometry Linear characteristic Peak power 120 W Frequency response 1.8 kHz – 22.5 kHz Sensitivity 92 dB Accessories for installation in original mounting locations Weight 0.04 kg Technical specifications Size 26 mm Voice coil Ø 20 mm Re 3.7 Ohm Fs 1500 Hz Le 0.02 mH Mms 0.17 g Cms 0.07 mm/N BL 1.3 T*m Qts 1.6 Qes 3.5 Qms 2.9 Magnet Neodymium Magnet size (W x D x H) 19 x 0 x 3 mm A 44 mm B 38.5 mm C 20 mm D 9.1 mm Note: High-pass filtered @ 2.5 kHz – 12 dB/Oct.50,74 €*Shipping: 11,95 €Secure redirect to the provider
-
Hertz Cento CX 165Hertz Cento CX 165 is a 6.5 inch (16.5 cm) coaxial speaker as a 2-way coaxial system. The high-frequency section includes a 24 mm Soft-Tetolon tweeter with a 20 mm voice coil, ferrofluid cooling, RHFC (Rotary High Frequency Contour), and FEM-optimized faceplate. The mid-bass driver uses a 25 mm voice coil on an aluminum carrier, a 165 mm SPP-M membrane made of semi-pressed paper with mica, and a high-density flux ferrite magnet; the tweeter operates with a neodymium magnet. The power handling is 70 W RMS and 210 W Peak at 4 Ohm impedance. Frequency response is 55–22000 Hz and sensitivity is 93 dB. Xmech 4.9 mm. Magnet sizes: woofer 85 x 32 x 15 mm, tweeter 13 x 2 mm; voice coil diameter: woofer 25 mm, tweeter 13 mm. Dimensions A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, F 24 mm, and Und 171 mm. Electroacoustic parameters: D 131.5 mm, Re 3.2 Ohm, Fs 65 Hz, Le 0.21 mH, Vas 12.2 l, Mms 13.3 g, Cms 0.46 mm/N, BL 4.8 Tm, Qts 0.60, Qes 0.73, Qms 3.4. Weight per speaker 0.95 kg. Features 6.5 inch (16.5 cm) coaxial speaker 2-way coaxial system 24 mm Soft-Tetolon tweeter 20 mm tweeter voice coil Ferrofluid cooling in the tweeter RHFC (Rotary High Frequency Contour) tweeter FEM-optimized tweeter faceplate 25 mm voice coil on aluminum carrier (mid-bass driver) 165 mm SPP-M membrane (semi-pressed paper + mica) High-density flux ferrite magnet, low-carbon pole plates (mid-bass driver) Neodymium tweeter magnet Compact 3-spoke basket Rubber magnet protection Speaker grille made of ABS with metallic finish and metal mesh Optimization for off-axis operation Power handling RMS 70 W Power handling Peak 210 W Impedance 4 Ohm Frequency response 55–22000 Hz Weight per speaker 0.95 kg Technical Specifications SPL 93 dB Xmech 4.9 mm Woofer voice coil Ø 25 mm Tweeter voice coil Ø 13 mm Magnet size woofer 85 x 32 x 15 mm Magnet size tweeter 13 x 2 mm D 131.5 mm Re 3.2 Ohm Fs 65 Hz Le 0.21 mH Vas 12.2 l Mms 13.3 g Cms 0.46 mm/N BL 4.8 Tm Qts 0.60 Qes 0.73 Qms 3.4 A 165 mm B 142 mm C 71 mm D 62.5 mm Und 171 mm F 24 mm85,97 €*Shipping: 12,26 €Secure redirect to the provider
-
Hertz Cento CX 690Cento CX 690 is a 6 x 9 inch speaker set from Hertz as an oval 3-way coaxial speaker with 4 Ohm, 100 W RMS, and 300 W peak. The construction includes an SPP-M diaphragm made of semi-pressed paper with mica and mica powder, as well as a wide rubber surround. The high-frequency system consists of a 40 mm tweeter and a 20 mm super tweeter with a neodymium magnet. The tweeter faceplate has been optimized with FEM simulations. The basket has a metallic finish and rubber magnet protection. A speaker grille made of ABS plastic with metallic finish and metal grille is provided. Frequency response 40 Hz to 23 kHz, efficiency 93.5 dB, Xmech 5.5 mm, and weight per speaker 1.55 kg. Additional specifications include a 30 mm woofer voice coil, a 28 mm tweeter voice coil, and magnet dimensions of 100 x 32 x 15 mm for the woofer and 19 x 3 mm for the tweeter. Features 6 x 9 inch speaker set Oval 3-way coaxial speaker Designed for horizontal installation position SPP-M diaphragm made of semi-pressed paper with mica, enhanced with mica powder Width rubber surround Woofer magnet ferrite with high density, low-carbon pole plates Basket with metallic finish and rubber magnet protection Tweeter faceplate design FEM-optimized Speaker grille made of ABS plastic with metallic finish and metal grille Tweeter 40 mm Super tweeter 20 mm Impedance 4 Ohm RMS power 100 W Peak power 300 W Frequency response 40 Hz – 23 kHz Weight per speaker 1.55 kg Technical specifications Tweeter diaphragm 40 mm Woofer voice coil Ø 30 mm Tweeter voice coil Ø 28 mm Woofer magnet size 100 x 32 x 15 mm Tweeter magnet size 19 x 3 mm Effective diameter D 139 mm Re 3.3 Ohm Fs 70 Hz Le 0.2 mH Vas 11.1 l Mms 13 g Cms 0.34 mm/N BL 4.9 T·m Qts 0.67 Qes 0.83 Qms 3.3 Sound pressure 93.5 dB Xmech 5.5 mm A 238 mm B 224 mm C 95 mm D 78.5 mm And 268 mm F 29 mm Woofer magnet ferrite with high density Tweeter magnet neodymium Diaphragm semi-pressed paper + mica115,56 €*Shipping: 12,68 €Secure redirect to the provider
-
How fast can Formula 1 cars go?
Formula 1 cars can reach speeds of up to 230 mph (370 km/h) on the fastest tracks. The top speed of a Formula 1 car is limited by regulations, but they are still incredibly fast vehicles. The acceleration of these cars is also impressive, with the ability to go from 0 to 60 mph in just 2 seconds. The high speeds and quick acceleration of Formula 1 cars make them some of the fastest racing vehicles in the world. **
-
How fast do Formula 1 drivers drive?
Formula 1 drivers can reach speeds of over 200 miles per hour (320 km/h) on certain tracks. The average speed during a race can vary depending on the track layout, but it is generally around 130-150 miles per hour (210-240 km/h). The top speed achieved by Formula 1 cars is influenced by factors such as track design, aerodynamics, and engine power. These high speeds require exceptional skill, precision, and focus from the drivers. **
-
How fast is the 2016 Formula 1 car?
The 2016 Formula 1 car is incredibly fast, with top speeds reaching over 230 mph (370 km/h) on certain tracks. These cars are designed to be the fastest racing cars in the world, with powerful engines and advanced aerodynamics that allow them to reach such high speeds. The acceleration of these cars is also impressive, going from 0 to 60 mph in just 2 seconds. Overall, the 2016 Formula 1 car is a marvel of engineering and speed. **
-
Why doesn't Xbox Game Pass Ultimate 1 work?
Xbox Game Pass Ultimate 1 may not work due to a variety of reasons, including technical issues with the Xbox Live service, account payment problems, or issues with the game itself. It's possible that there may be a temporary outage or maintenance affecting the service. Additionally, there could be a problem with the user's account or subscription status. It's recommended to check for any service alerts or contact Xbox support for assistance in resolving the issue. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.